1. Home
  2. Blog
  3. SEO
SEO

Local Landing Pages: How to Target Multiple Towns Without Writing Spam

Local landing pages that rank in several towns without breaking Google's doorway rules: what each page needs, how many to build and what to avoid.

8 min readE-web UK
Van driver checking a route on a tablet in a residential street, with terraced houses behind

You can target several towns with local landing pages, as long as each page gives someone in that town something they could not get from your other pages. That means real local detail: jobs you have done there, travel times, local prices or rules, photos and reviews from customers in that area. Pages that only swap the town name are doorway pages, and Google's spam policies say plainly that it acts against them.

This article is the practical side: how to decide which towns deserve a page, what goes on each one, how to gather the material without inventing it and how to structure the site so the pages help rather than compete. For the wider picture (Google Business Profile, reviews and citations) see our guide to local SEO in the UK.

Key takeaways

  • A town page earns its place only if it says something true and specific about that town.
  • Start with the handful of towns where you already have work, reviews and photos.
  • Build pages from real job records, not from a template with the name swapped.
  • One strong service page plus a few well evidenced town pages beats fifty thin ones.
  • Link town pages from a clear areas hub and from relevant service pages.
  • Prune or merge pages that never get impressions after several months.

What Google means by a doorway page

Google's spam policies describe doorway pages as pages made to rank for specific, similar searches that funnel people somewhere else or offer little unique value. The example they give is close to home: multiple pages targeting different cities or regions that lead to essentially the same content.

So the test is not "do I have many location pages". Plenty of legitimate businesses do. The test is whether each page would be useful to someone who landed on it from that town. A plumber's page for Wolverhampton that lists the postcodes covered, the typical call out time from the depot in Bilston, three recent boiler jobs in WV6 with photos and two reviews from local customers is useful. The same page with "Wolverhampton" replaced by "Walsall" and nothing else changed is not.

Since the spam updates of the last few years, we have seen sites with large sets of templated town pages lose visibility across the whole domain, not only on the town pages. The risk is bigger than the pages themselves.

Deciding which towns get a page

Do not start with a list of every town within 30 miles. Start with evidence. Pull your job records, invoices or CRM for the last year or two and count work by town or postcode district. You will usually find that most of your work comes from a small number of places.

A sensible first cut:

  1. Your base town, which your homepage and Google Business Profile already cover.
  2. Three to six towns where you do regular work and have reviews, photos or case notes.
  3. Towns that people search in a distinctive way (for example, a borough name that locals use instead of the city).

Leave the rest covered by a single "areas we cover" page listing places and postcodes. You can promote a town to its own page later, once you have something to say about it. Every page you add is also a page to keep accurate, which matters when prices or coverage change.

What goes on a good town page

There is no fixed template, and if every page has identical headings in identical order it starts to look generated. That said, the strongest pages we build usually draw on most of the following:

  • Coverage specifics. Postcode districts, named estates or villages, and any areas you do not cover.
  • Practical detail. Typical response or travel time, parking or access notes, if same day work is possible there.
  • Local jobs. Two to four short write ups of real jobs in that town: what the problem was, what you did, a photo. Use the street or area only with the customer's permission, and never a full address.
  • Local reviews. Reviews from customers in that town, quoted accurately with first name and area.
  • Local factors. Things that genuinely differ: a conservation area that affects window replacements, hard water that affects boilers, a council's permit rules for skips, a low emission zone for vehicle work.
  • A clear next step. Phone number, a form, and a sentence on what happens after someone gets in touch.

If you cannot fill most of that for a town, that town does not need a page yet.

Gathering local content without inventing it

The hardest part is not the writing. It is collecting the raw material. Some habits that make it easy for a small business:

  • Ask whoever does the job to take two photos (before and after) and add one line about the job and the town to a shared folder or the job sheet.
  • When you ask for a review, ask the customer to mention the area if they are happy to.
  • Keep a simple note of local quirks your team notices: access problems, typical property types, recurring faults.
  • Review the folder every month and add the best job to the relevant town page.

What you must not do is make things up: invented reviews, made up case studies or claims of an office in a town where you have none. Beyond the search risk, fake reviews can breach consumer protection law, and the CMA has been clear that it takes them seriously. If you have no real material for a town yet, wait.

Writing pages that do not read like copies

Even with real material, writers fall back on the same opening for every page. Some practical rules we use:

  • Open each page with the most specific fact about that town, not with a sentence about your company.
  • Let page length vary. A busy town with lots of jobs gets a longer page; a smaller one can be shorter and still be useful.
  • Change the order of sections based on what matters locally. On a page where parking is the main headache, put that near the top.
  • Keep boilerplate (guarantees, accreditations, how quoting works) short, and link to the main service page for detail.

Read two of your town pages side by side. If a customer could not tell which town they are on with the heading covered, rewrite them.

Town pages work best as part of a clear structure rather than a pile of pages in the footer. The setup we usually recommend:

Page typeJobExample URL
Service pageExplains the service fully, ranks for the general term/boiler-repair/
Areas hubLists every area covered, links to town pages/areas/
Town pageLocal evidence for one town, links back to service pages/areas/walsall/
Town plus service pageOnly where you have plenty of local jobs for that one service/areas/walsall/boiler-repair/

Be cautious with the last row. Town times service combinations multiply quickly, and that is exactly how sites end up with hundreds of thin pages. Build those only where the evidence supports it. Our guide to service page design covers the service pages themselves, which should be the strongest pages on the site.

Link from town pages to the relevant services, from the hub to every town, and from job write ups or blog posts to the town where the job happened. Avoid a footer block of 40 town links on every page; it adds little and looks like the old tactic it is.

Technical details worth getting right

A few smaller points that make a difference:

  • Give each page a unique title and meta description that mentions the town and the service naturally.
  • Use LocalBusiness schema on the main site with your real address. Do not add fake addresses for towns where you have no premises.
  • If you are a service area business, set your service areas in Google Business Profile to match the towns you have pages for.
  • Compress job photos and set sensible alt text describing the job, not a string of keywords.
  • Make sure pages are in your XML sitemap and are reachable through normal links, not only through a search box or map widget.

Measuring, pruning and keeping pages honest

After three to six months, check Search Console for each town page: impressions, clicks and the queries it shows for. Pages with plenty of impressions but few clicks may need a better title. Pages with almost no impressions after that long usually have too little to offer, or the town has too little search demand.

For those, either add genuine material or merge the page into the areas hub and redirect it. Pruning feels wrong to clients who paid for the pages, but a smaller set of useful pages is the safer site, especially through core updates. Our notes on the 2026 core update explain why thin sections can hold back the rest of a domain.

Also keep the pages true. If you stop covering a town, update or remove the page. Customers who ring from a page and get told "we don't go there" do not come back.

Frequently asked questions

How many location pages should a local business have?

As many as you can fill with genuine local detail, and no more. For most small service businesses that is somewhere between a handful and a couple of dozen. Start small and add towns as you build up jobs and reviews there.

Are location pages bad for SEO?

No. Location pages with real, specific content are fine and often rank well. Templated pages that only change the town name are treated as doorway pages and can harm the whole site.

Can I rank in a town where I do not have an office?

Your website pages can rank in towns you serve, as long as they are useful and honest. The Google map pack is harder, because distance from your verified address matters, and you should never list a fake address to get around that.

Should I use AI to write town pages?

It can help tidy notes into readable text, but it cannot supply the local facts, jobs and reviews that make a town page worth having. Pages generated at scale without that material are exactly what Google's spam policies target.

What is the difference between a service area page and a location page?

People use the terms loosely. Usually a location page is about one town, while a service area page lists every area you cover. Many sites use one areas hub with links to a smaller number of individual town pages.

Want town pages that hold up?

We plan and build local page structures from your real job data, so they rank without the spam risk. See our SEO service or ask for a quote.

Want this done properly?

Tell us what your website, app or system has to do. We will come back with a clear plan and a fixed written quote.